Garden Seeder


The Garden Seeder Attachment for the Hoss Wheel Hoe makes planting easy! This precision seed planter uses our innovative seed plate design that is customizable to meet your exact planting needs. Accurately plant your garden without wasting seed by over-planting. MADE IN THE USA!

​For use in firm, prepared seed beds. Does not perform well in fluffy, well-tilled soils or soils that have a large accumulation of organic residue. For planting in those soil conditions, consider our Hoss Garden Seeder. For more information on which of our Seeders is appropriate for your soil conditions, see the blog post here.

  • Features a removable hopper with planting depth 1/4″ – 1 1/2″
  • Optional Row Marker and optional extra Seed Plates
  • Plant small and large seed with the Hoss Garden Seeder Attachment
  • Includes interchangeable seed plates for different seed sizes
  • Easily attaches to the Hoss or Planet Jr. Wheel Hoes


Included with the Hoss Garden Seeder Attachment:

  • Seed Plate #1 (HS4-1001) – broccoli, cauliflower, cabbage, turnips, mustard, rutabaga, and other fine seeds
  • Seed Plate #2 (HS4-1002) – onion, small coated seeds
  • Seed Plate #3 (HS4-1003) – okra, pelleted: carrots, lettuce, beets, chard
  • Seed Plate #4 (HS4-1004) – small sweet corn, popcorn
  • Seed Plate #5 (HS4-1005) – small peas and beans
  • Seed Plate #6 (HS4-1006) – medium beans, peas, large sweet corn, field corn


Fits Hoss and Planet Jr. wheel hoes. Does not fit the Glaser Wheel Hoe. Hoss Wheel Hoe is sold separately.


Disk Harr​ow

Use the Disk Harrow attachment for the Hoss Wheel Hoe to cultivate before planting and to keep weeds under control after planting. Easily change the angle of the concave disks to alter the degree of cultivation. MADE IN THE USA!

​The Disk Harrow attachment for the Hoss Wheel Hoe has two sets of three, concave disks that cut into your garden soil to cultivate, cut weeds and prevent new weeds from growing. The simple push pin design allows you to easily change the angle of the disks, giving you the option of changing the degree of cultivation.

Set the harrow blades straight forward for breaking up stems and soil clods, set them at a medium angle for general soil cultivation, or set them at a deep angle for moving soil towards or away from plants. When plants are small, use the opening between disk sets to straddle the row and cultivate both sides in one pass with the Hoss Double Wheel Hoe.

Disk Harrow Specifications

  • Constructed with a 13” harrow bar made of powder-coated steel with two sets of zinc-plated harrow disks.
  • Each zinc-plated harrow disk has a 5 3/8” diameter and bronze bushings that allow the disks to easily rotate and cut through the soil.
  • Individual disks are spaced 2 3/8” apart with a 5” opening between disk sets.
  • Each disk set has 4 different directional settings that are easily changed by pulling and inserting the push pin.


Sweeps

​The Sweeps are our most versatile attachment for the Hoss Wheel Hoe. They provide shallow cultivation to prevent feeder root damage while eliminating weeds from your garden. Great for weed prevention. MADE IN THE USA!

​Our Wheel Hoe Sweeps attachment give you exceptional versatility for cultivating and weed control in your garden. The best way to manage weeds in your garden is to provide a shallow cultivation before they appear. Weed control in a vegetable garden is a preventative practice, not a reactive one.

Turn the Sweeps inward for a hula hoe or stirrup hoe setup that allows you to weed paths between rows. Turn them outward to weed close to plants without damaging feeder roots. Use with the Double Wheel Hoe to straddle the row when plants are small, allowing you to weed both sides of the row in a single pass.

Wheel Hoe Sweeps Attachment Details

  • Made of black, zinc-plated steel that has a professionally sharpened edge for cutting the toughest weeds in their path.
  • Each Sweep has a 7” long cutting blade which allows for a maximum 14” cutting path when turned inward for a hula hoe or stirrup hoe setup.
  • The left and right blades have slightly different angles so they will overlap when turned inward.*


*This allows you to alter the width of the cultivating/cutting path by adjusting the blades either closer together or farther apart for weeding paths of different widths.

Oscillating Hoe

Hoss Oscillating Hoe is the ultimate garden weeding tool for your garden. Easily attach to a Hoss Wheel Hoe and begin controlling the weeds with the sharpened, spring steel blade that oscillates forward and backward. MADE IN THE USA!

Hoss Oscillating Hoe is made with a powder-coated steel frame and a spring steel blade that’s sharpened on both sides. The sharpened blade is heavy-duty and durable so it cuts through the thickest weeds. Similar in design to a hula hoe, scuffle hoe or stirrup hoe, the Oscillating Hoe has a hinged 20 degree action that allows you to cut weeds in both a forward and backward direction.

Available in 6”, 8” and 12” lengths, the Oscillating Hoe is the perfect tool for weeding between garden rows.  Use the 6” version of this hula hoe on winter crops such as mustard greens or lettuce that typically have narrower row spacing. Use the 12” version on traditional summer crops that tend to have wider row spacing. The spring steel blade provides a shallow cultivation that allows you to weed close to plants without damaging the feeder roots.

The Oscillating Hoe is also a great garden tool for weed prevention. The best way to manage weeds in your garden is to provide a shallow cultivation before they appear. Weed control in a vegetable garden is a preventative practice, not a reactive one.


Plow Set

Use the Plow attachment(s) for the Hoss Wheel Hoe to make furrows for planting, forming beds by hilling or throwing dirt to plants to provide support. MADE IN THE USA!

Hoss Plow attachment(s) are made of powder-coated steel and built to last a lifetime. Designed to be used in established gardens where soil has previously been worked, this Wheel Hoe attachment allows you to easily move soil for building furrows or beds for planting. Available individually as a left (HM5) or right (HN5) plow, or save money by purchasing as a pair.

Not Your Typical Walk Behind Plow

 Walk Behind Plow attachments are the perfect garden tool for furrowing and hilling in your vegetable garden! Easily attach them individually or as a pair to the Hoss Single or Double Wheel Hoe. The Wheel Hoe provides a lower center of gravity than a high-wheeled push plow, making it much easier to use than a typical walk behind plow.

The Walk Behind Plow Set on the Double Wheel Hoe makes potato planting a breeze! Place the plows in the inward position to make a perfect furrow for planting your potatoes, then turn the plows outward to easily cover the planted potatoes. When corn plants are small, use the Double Wheel Hoe and Plow Set to straddle corn rows and throw dirt to plants, stabilizing them for any increment wind or rain storms that might cause them to fall.


​Left Plow

​Left Plow attachment for use with Hoss Wheel Hoes. Create perfect planting furrows or throw dirt to plants to stabilize them from wind damage. MADE IN THE USA!

Hoss Left Plow attachment is American-made and built to last with powder-coated steel. Use this Wheel Hoe Attachment for creating planting furrows or for throwing dirt to plants such as corn to prevent damage from wind storms. Also works great for planting potatoes. Create a furrow, plant your potatoes and easily cover potatoes with the plow blade.

Hoss Plows are designed to be used in established gardens in soils that have been worked. This is the Left Plow (HM5) which means it throws dirt to the left. Use it individually or as a pair with the Right Plow (HN5). Also fits Planet Jr. Wheel Hoes.

Right Plow

Right Plow attachment for use with Hoss Wheel Hoes. Create perfect planting furrows or throw dirt to plants to stabilize them from wind damage. MADE IN THE USA!

Hoss Right Plow attachment is American-made and built to last with powder-coated steel. Use this Wheel Hoe Attachment for creating planting furrows or for throwing dirt to plants such as corn to prevent damage from wind storms. Also works great for planting potatoes. Create a furrow, plant your potatoes and easily cover potatoes with the plow blade.

Hoss Plows are designed to be used in established gardens in soils that have been worked. This is the Right Plow (HN5) which means it throws dirt to the right. Use it individually or as a pair with the Left Plow (HM5). Also fits Planet Jr. Wheel Hoes.


Spreader Bar Bonus

The Spreader Bar Bonus allows you to effectively weed both sides of the row in one pass. Attach to the Double Wheel Hoe and straddle the row of small plants, weeding both sides at one time.

​The Spreader Bar Bonus includes our Spreader Bar extension and 6″ Oscillating Hoes. Simply attach the Spreader Bar to the tool bar of the Hoss Double Wheel Hoe, then attach the 6″ Oscillating Hoes on each side of the Spreader Bar. The space between the wheels on the Double Wheel Hoe allows you to straddle small plants (up to 6″) and work both sides of the row in one pass.

Works great for weeding small corn, bean and pea plants to manage weeds before plants are mature enough to shade out further weed growth. It also works great for green crops like spinach that remain small and low to the ground. The Spreader Bar is made with 1/4″ powder-coated steel and is 14 3/4″ long. The 6″ Oscillating Hoes have a sharpened, spring steel blade and a powder-coated steel frame.


Spreader Bar

Use the Spreader Bar extension on the tool bar of the Single Wheel Hoe or Double Wheel Hoe to extend the length of the tool bar for adding more attachments or offsetting your working path. MADE IN THE USA.

​The Spreader Bar extension allows you to extend the length of the tool bar on the Hoss Single Wheel Hoe or Double Wheel Hoe. The Spreader Bar extension is 14 3/4″ long and like the tool bar on Hoss Wheel Hoes, it is made of 1/4″ powder-coated steel. Use it to add more Wheel Hoe Attachments such as Cultivator Teeth to increase your working width. Use it for creating a row-straddling setup with the Double Wheel Hoe using Sweeps or 6″ Oscillating Hoes. It also can be used to offset your working path by setting your implements outside of your walking path.


Replacement Oscillating Hoe Blade

A Replacement Oscillating Hoe Blade is available for each size of Hoss Oscillating Hoe – 12″, 8″ and 6″.  Each replacement blade kit includes the oscillating hoe blade and a new set of stop pins for installation.

​The Replacement Oscillating Hoe Blade fits the Hoss Oscillating Hoes which are available in 12″, 8″ and 6″ sizes. Select the length that applies to the replacement blade that you need.

Each blade is made with spring steel and sharpened for maximum weed cutting capabilities. Each blade includes a new set of stop pins for installing the new blade to the Oscillating Hoe frame.

Our Oscillating Hoes work great for cutting out the thickest weeds and keeping new weeds from emerging. The blade pivots or “oscillates” 20 degrees back and forth which allows you to cut weeds in a forward or backward direction.


Cultivator Teeth

Hoss Cultivator Teeth for the Hoss Wheel Hoe are constructed using stamped steel and then powder coated to prevent rust and weather damage. MADE IN THE USA!

Hoss Cultivator Teeth feature a narrow throat and a wide foot which provides thorough, shallow cultivation underneath the soil. They are an exceptional Wheel Hoe Attachment for lifting and introducing air back into the soil after heavy periods of precipitation.

Once the heavy crust forms on your garden after extended rain, use the Cultivator Teeth to break up the crust. Works great for helping to dry out your garden if it becomes too wet. Use one tooth for laying off rows or use up to five for intense cultivation.

Also will attach on the Planet Jr. Wheel Hoe. Sold in packs of three and includes necessary bolts and flange nuts for attaching to the tool bar of the Wheel Hoe.


Steam Bent Handles

​Hoss Steam Bent Handles are designed for use with Hoss Wheel Hoes and Planet Jr. Wheel Hoes. These handles are Amish-crafted and made out of hardwood ash.

​Use our Steam Bent handles on your Hoss Wheel Hoe or Planet Jr. Wheel Hoe. These handles are Amish-crafted and made out of hardwood ash that will last a lifetime. The steam bent design features a curved end to the handles that allows you to grip and squeeze the entire handle in your hand.

The handles are pre-drilled to fit Hoss and Planet Jr. Wheel Hoes, Single and Double Wheel models. Includes a solid hardwood dowel that stabilizes the handles. When attached to a Hoss Wheel Hoe, the handles can be adjusted to accommodate the farmer’s height.

Steam Bent Handles dimensions:

  • Length: 54.5″
  • Width: 1.5″
  • Thickness 7/8″


​​Pistol Grip Handles

Hoss Pistol Grip Handles are designed for use with Hoss Wheel Hoes and Planet Jr. Wheel Hoes. These handles are Amish-crafted and made out of hardwood ash.
MADE IN THE USA

Use Hoss Pistol Grip Handles on your Hoss Wheel Hoe or Planet Jr. Wheel Hoe. These handles are Amish-crafted and made out of hardwood ash that will last a lifetime. The pistol grip design features a “fat” end to the handle that fits in the palm of your hand for pushing the tool through the soil.

The handles are pre-drilled to fit Hoss and Planet Jr. Wheel Hoes, Single and Double Wheel models. Includes a solid hardwood dowel that stabilizes the handles. When attached to a Hoss Wheel Hoe, the handles can be adjusted to accommodate the farmer’s height.

Pistol Grip Handles dimensions:

  • Length: 54.5″
  • Width: 1.5″
  • Thickness 7/8″


Stock Plow Handles

Our Stock Plow Handles can be drilled and fitted to most horse drawn implements as well as other gardening equipment. These handles are Amish-crafted and made out of hardwood ash.
MADE IN THE USA

​Use our Stock Plow Handles to maneuver or work your horse drawn equipment and implements. These handles are Amish-crafted and made out of hardwood ash that will last a lifetime. The steam bent design features a curved end to the handles that allows you to grip and squeeze the entire handle in your hand.

The handles can be drilled and fitted to almost any horse drawn implement as well as other gardening equipment. Attach to your favorite horse-drawn garden plow or disk harrow cultivator to turn your soil and prepare your garden for planting.

Stock Plow Handles dimensions:

  • Length: 55″
  • Width: 2″
  • Thickness 1.125″


Double Wheel Hoe Conversion Kit

​The Double Wheel Hoe Conversion Kit allows you to quickly and easily convert your Hoss Single Wheel Hoe into a Double Wheel Hoe. Includes 15″ steel wheel, axle, dust caps and lock nut.
MADE IN THE USA

With the Double Wheel Hoe Conversion Kit, you can easily change your Single Wheel Hoe into a Double Wheel Hoe. The Double Wheel Hoe allows you to straddle the row when plants are small, so that you can work both sides of the row in one pass.

The Double Wheel Hoe also provides added stability for cultivating or weeding your garden. The Double Wheel Hoe allows you to use attachments such as the Spreader Bar Bonus or the Sweeps with the Spreader Bar.

Double Wheel Hoe Conversion Kit includes:

  • 15″ steel wheel
  • axle
  • dust caps
  • lock nut


Shoulder Bolt

The Shoulder Bolt allows you to quickly and easily convert your Hoss Double Wheel Hoe into a Single Wheel Hoe. Shoulder Bolt has dimensions of 3/8″ x 2 3/4″.
MADE IN THE USA

​Easily and quickly change your Double Wheel Hoe into a Single Wheel Hoe with our Shoulder Bolt accessory. This bolt is the axle for the Single Wheel Hoe. Simply switch the arms that extend to the wheels, and install the smaller axle to convert into a Single Wheel Hoe.

The Single Wheel Hoe has a smaller footprint than the Double Wheel Hoe, which allows you to work in a narrower row spacing situation. This smaller wheel track is important when cultivating and weeding winter crops such as lettuce, kale and collards.

Shoulder Bolt dimensions:

  • 3/8″ x 2 3/4″


Hoss Drip Layer
Hoss Drip Tape Layer Attachment makes it quick and easy to lay Drip Irrigation Tape with the Hoss Double Wheel Hoe and Plow Set. By simply pushing the Wheel Hoe along a furrow, the Drip Tape Layer Attachment places the drip tape into the furrow and covers it in one pass.

​The Drip Tape Layer Attachment takes a two-person job and turns it into a one-person job! Easily attaches to the Hoss Double Wheel Hoe and allows you to lay our 1,640 ft. rolls of 8 mil Drip Irrigation Tape. We highly recommend using in conjunction with the Hoss Plow Set to bury the drip tape. Burying the drip tape keeps it upright with the emitters facing upward, so that the water is directed toward your plants — not away from them. It also prevents rodents from chewing into the tape, causing leaks and headaches.

For most crops, we recommend laying the drip tape in a furrow dug with the Hoss Double Wheel Hoe and Plow Attachments along the line of your desired row. This allows you to plant directly on top of the drip tape, whether it be via direct seeding with the Hoss Garden Seeder, or by transplants. For root crops such as carrots, beets and radishes, you won’t need to dig the aforementioned furrow before laying the drip tape. For these root crops, you can use the Plow Set attachment behind the Drip Tape Layer Attachment to bury the drip tape just under the soil. This will allow you to plant these root crops on both sides of the tape without the tape interfering with the root production of these crops.

*Cannot be used with Hoss Single Wheel Hoe

*Double Wheel Hoe, Plow Set and Drip Tape not included

Using the Drip Tape Layer Attachment

The Drip Tape Layer Attachment includes two galvanized nails for staking the Drip Tape at the end of each row. The nail pushed through the drip tape and into the ground will keep the drip tape roll tight and ensure that the drip tape roll feeds appropriately. Push one of the nails through the tape and into the ground, then push the Wheel Hoe with the Drip Tape Layer Attachment down the row to apply the drip tape into the furrow or on top of the soil. At the end of each row, simply cut the drip tape with a knife and use the other nail to stake the next row of drip tape.




















































    






Blitz, BCS and Grillo walk-behind tractors, related implements and accessories

Click an image for a larger picture

​​​​Dailey's Farm & Walk-Behind Tractors

Contact us:

(931) 295-9009

NOTE: Hoss Tools has stopped wholesaling their products and as a result we are no longer carrying them going foward. But we do have some limited supply of stock left, of mostly attachments for the wheel hoe. WE HAVE NO STAND-ALONE SEEDERS OR WHEEL HOES LEFT, BUT WE DO HAVE SOME ATTACHMENTS LEFT (SWEEPS, PLOW SET AND OSCILLATING HOES). Call or email for availability.


Dailey's Farm and BCS Shop