Dailey's Farm & Walk-Behind Tractors
The BCS Water Transfer Pump attachment delivers more value to your BCS tractor! This self-propelled pump can be used for several applications on your property. With a maximum of 50 PSI and 147 GPM, the pump is fully capable of handling lawn and garden watering, flood water removal, and pond/pool filling.
The Water Pump is compatible with all BCS tractor models (710 and up).
The Hypro centrifugal pump is manufactured by Pentair and features an aluminum casting with 2’’ inlet and outlets. The pump is “self-priming,” which utilizes air and water to reach a fully-primed pumping condition. Only the chamber needs to be filled with liquid prior to operation.
The attachment includes 2’’ suction and discharge hoses, which are 25’ and 50’ long, respectively. Both hoses have aluminum camlock fittings, and one extra camlock fitting is included with the discharge hose. The pump is also fitted with a caster wheel for easy maneuverability.
A foot valve/strainer combo and steel strainer are also included with the Water Transfer Pump. The foot valve has a screen around the foot to keep out larger debris, and prevents drain back to maintain constant priming.
Using ponds, creeks, or wells as water sources, the Water Transfer Pump is a good fit for flood or sprinkler irrigation. For drip irrigation, a 120-micron filter, regulator, and pressure relief valve is recommended.
The Water Transfer Pump has a maximum "head" of 115 feet. This refers to the total height from the source of the water to the destination or discharge point.
The unit also has a maximum vertical suction lift of 28 feet, which is the vertical distance from the water source to the pump. This is important for draining a basement or deep pond.
BCS Irrigation Pump:
As its name implies, the High-Pressure Irrigation Pump moves water farther and higher than typical pumps would deliver. It's better for sprinkler systems and other irrigation applications when compared to BCS's Water Transfer Pump.
The light and compact 85-PSI pump is manufactured by Rovatti of Italy (model M0-50A) and is easy to install. Unlike the Water Transfer Pump, it does NOT require a Power Cradle accessory to increase RPM of the tractor PTO.
Constructed with high quality cast iron, the pump incorporates heavy duty helical gears, oil bath lubrication of the bearings, and a high-quality mechanical seal, which collectively yield high efficiency and a reliable, maintenance-free operational life.
The pump has plastic intake and outlet fittings, with 50' discharge and 25' suction hoses with cam lock fittings. A foot valve/strainer combo and steel strainer are also included with the unit. The foot valve has a screen around the foot to keep out larger debris, and prevents drain back to maintain constant priming. It also has a caster wheel for easy maneuverability.
In addition to irrigation applications, the pump can be used for dust suppression, remote area fire fighting, washing equipment, and more.
The max total head is 220 feet and the suction lift is 26 feet. Comparatively, the Water Transfer Pump's total head is 115 feet and suction lift is 28 feet.
Click on an image for a larger picture