Dailey's Farm & Walk-Behind Tractors
Click an image for a larger picture
Our lowest cost tractor with differential axle for ease of maneuvering. Excellent for medium-sized soilworking applications; also great for stationary applications (wood splitter, chipper/shredder, etc.) and some front PTO applications that do not require a high ground speed (snowblower, flail mower, etc.). The combination of a differential and larger wheels make this model more suited to mowing tasks than the G85, but this is still not a great choice for large mowing applications due to relatively slow working speeds (max. 1.8 MPH). If you are mowing several acres, a larger tractor would be desired for a greater selection of working speeds (and also for steering brakes, which aid greatly in maneuverability, especially on slopes). G85D Transmission directly Comparable to the BCS model 732.
Having differential on the tractor makes a HUGE difference in how it handles and on end user physical wear and tear/fatigue. Differential drive makes a big difference from a physical stand point. We highly recommend differential (if one can afford it) in nearly all situations.
|9 HP Honda GX270 Gas|
10 HP Yamaha MZ300 Gas
Recoil (manual); OPTIONAL: Electric start with Recoil back-up on Honda gas
Conical, serviceable, “Active” automotive type
All hardened steel gears and shafts supported by ball bearings, in oil bath
2 working speeds Fwd. & Rev, + Transport speed (in Rear-PTO mode, to pull a trailer if desired)
Rear PTO (tilling) mode:
Fwd: .75 mph, 1.8 mph, 8.3 mph
Rev: .75 mph, 1.8 mph
Front PTO (mowing) mode:
Fwd: .75 mph, 1.8mph
Rev: .75 mph, 1.8mph
Operator Presence Control (deadman switch), reverse gear/PTO lockout (to prevent tilling in reverse)
Anti-vibrated, instantly adjustable up and down and side-to-side, fully reversible to convert from front PTO to rear PTO mode. All controls on handles.
Independent, 965 rpm at maximum engine speed
Method of changing implements:
Two 12mm threaded studs and nuts or optional quick coupling
Standard Wheel Size:
9hp: 4”x10”x18” tractor tread, adjustable track width, tube type
10hp: 5”x10”x20” tractor tread, adjustable track width, tube type. Foam-filled option available.
Standard outside wheel track (w/o accessories):
9hp: 17, 19, 21 or 24 inches
10hp: 18, 20, 22 or 25 inches
Tractor Weight (w/o implements):
Gas: 9hp 190 lbs., 10hp: 205 lbs. | Add 20lbs for electric start on 9HP Honda